SPA KING XTA BLOWER

Description

On start, the XTA spa blower draws air into the intake where it
expands and is compressed again before being drawn into a vertical
drop, whereby the air is once again compressed and changes
direction to travel horizontal to be compressed again and induced
to rotate at high speed, the air is then driven through the motor and
down through our “Quad Ports” to exit in the air outlet for connection
to the spa.

SOUND LEVEL: In the products that are available from the pool
industry (world wide) the method favored by most of the industry,
is to clog up the blower with masses of foam to absorb the noise
once the blower is running, this action usually causes high air
temperatures at the outlet and overheating of the motor which then
has to be controlled by a thermal cut-out.
With the XTA we reduced the noise factor at its source with the
result of a lower motor operation temperature, thus increasing its
serviceable life.

RELIABILITY: Reliability has best been achieved by the reduction of
the corrosive action of “moisture laden air” which is forced through
the motor after the pressure of water reclaims the void in the air
delivery line once the blower has been shut down.

Our patented “Quad Port Partition” strips moisture from the returning
airflow which is in turn forced through the motor. The XTA Blower
motor compartment has been specially designed to retain any
moisture clear of the motor. We advise the use of a quality one-way
valve for all installations and an “earth leakage protection system” for
added electrical safety.

AIR SUPPLY LINE: recommended 50mm pipe with 45o angles to
change airflow direction.